Commercial & Warehouse Floor Epoxy in Arlington, TX

Commercial and warehouse floor epoxy is a heavier-duty job than a home garage. Arlington and the cities around it are full of office-warehouse units, flex space, auto shops, small manufacturers, gyms and retail along I-20, I-30 and State Highway 360. Those floors take forklifts, pallet jacks, rolling carts, dropped parts, chemical spills and constant foot traffic. The right coating protects the slab, makes the floor easier to clean, brightens the space and makes it easier to mark aisles and work zones.

Matching the system to the use

There is no single commercial floor. A light-duty storage room may only need a solid-color epoxy and a clear topcoat. A warehouse aisle with forklift traffic needs a thicker, higher-build system. An auto service bay needs resistance to hot tires, oils, brake fluid and solvents. Food and wash areas may need texture and coatings rated for frequent wet cleaning. We start by asking what happens on the floor every day, then recommend a system and a thickness to match.

Prep at commercial scale

Commercial slabs often carry years of sealers, curing compounds, tire marks, oil and old paint lines, and some have a smooth, hard power-troweled surface that coatings struggle to grip. We diamond grind or otherwise mechanically profile the whole area, repair cracks, spalls and broken joints, and check slab moisture before choosing a primer. Expansive clay soils in North Texas affect commercial slabs too, so joint and crack work is a real part of most jobs.

Working around your schedule

Most businesses cannot shut down for a week. We can phase a large floor in sections, work nights or weekends, and use faster-curing materials where downtime matters most. The phasing plan, the areas closed each day and the return-to-service times go into the written quote so you can plan staff and deliveries around them.

Safety lines and markings

Once the floor is coated, we can add painted or coated safety lines, walkways, forklift lanes, hatched no-go zones and color-coded work areas. Lines laid into the coating system wear far better than paint on bare concrete. Tell us what layout you need, or bring a plan from your safety manager.

Heat inside metal buildings

Many DFW warehouses and shops are metal buildings without full air conditioning, and summer interior temperatures can run high. Heat shortens the working time of epoxy and other resins, so we plan batch sizes and start times around building conditions and may schedule coating for nights or cooler stretches of the year.

Commercial costs

HomeGuide's general installed epoxy range is $4 to $10 per square foot, and it does not break out commercial work. ArmorGarage, a company that sells coatings, publishes a higher $7 to $15 range for professional commercial installs; treat that as one seller's estimate. Large, open, sound slabs fall toward the low end per square foot; small spaces, heavy repairs, thick systems, chemical-resistant topcoats and after-hours scheduling push it up. We measure and give you a written, itemized quote.